News

2020

04-25

Problems needing attention in oil cylinder assembly of workover rig

After the maintenance and assembly of the cylinder of the workover rig is completed, the pressure leakage test must be done before it can be put into use again. The cylinder of workover rig with hydraulic lock shall not be equipped with hydraulic lock during pressure leak test. During the test, the oil cylinder of the workover rig should first move back and forth several times at low pressure to discharge the air in the cylinder, and pay attention to whether the piston assembly moves with any blockage and uneven resistance. During pressure test, increase the pressure slowly and observe carefully whether there is leakage.

2020

04-24

Steam flooding high-temperature non-killing well operation is an important stimulation technology in deep heavy oil recovery technology in oilfield, which has been highly valued by oil exploitation. As an important equipment in petroleum machinery, the working condition of workover rig is more complex. In the working process, each system will produce dynamic load, making the mechanism prone to fatigue damage. In order to ensure the safety and reliability of the system, it is necessary to carry out damage estimation and life analysis on the basis of fatigue analysis theory and finite element software. In this paper, virtual prototype simulation technology is used to establish a parametric model of the operating platform system, the pipe column pick-up system, the mechanical boom lifting system and the truss support frame.

2020

04-22

Maintenance of drilling rig

Drilling machine is a common drilling equipment. This kind of machinery and equipment will consume a lot because of the difficult problem of working natural environment and time. Therefore, maintenance and maintenance must be carried out frequently. The benefit of doing so is that it can reduce the frequency of common failures of machinery and equipment and increase the service life of machinery and equipment.

2020

04-21

Classification of oil drilling rigs

With the continuous development of drilling production, the use conditions of drilling rigs are becoming more and more diversified, and various types of drilling rigs have appeared accordingly. The factors that affect the type and composition of drilling rig include drilling method, drilling depth, hole size and drilling tool size, drilling area conditions (such as power or fuel, transportation, meteorological conditions), etc. The following is the classification of drilling by Wanglian Machinery.

2020

04-20

What are the working systems of truck-mounted drilling rigs?

The work of the truck-mounted drilling rig is huge, and the working conditions and characteristics of each unit are different. According to the working characteristics of the truck-mounted drilling rig, we can divide the working system of the truck-mounted drilling rig into three parts, one is the rotating system, the lifting system and the circulation system, and the whole truck-mounted drilling rig is composed of eight major systems and equipment.

2020

04-18

Precautions for safe operation of truck-mounted drilling rig

Before use, check the flexibility of the air motor rotation, remove obstacles within the working range of the 150m truck-mounted drilling rig and walking road, and check the passing capacity of the road. Drilling tools, propulsion mechanisms, electrical systems, pressure systems, piping and dust protection devices.

2020

04-17

Treatment Scheme for Common Problems of Drilling Machine

Full hydraulic drilling rig large drilling machinery span drought drilling machine calculation, water quality, well depth and large drilling machinery vehicle drilling rig sales work report, brand reputation and reasonable price of large drilling machinery, vehicle-mounted positive and negative circulation drilling machine function analysis, after-sales service, etc. The price of drilling machines depends on many factors, such as the drilling equipment of the deep wireless remote control drilling machine, diameter, geology and driving mode of the micro drilling machine, etc. If you want to buy a micro drilling machine with high quality and low price, Wanglian Machinery supplies the latest air compressor and drilling machine. Please call us for advice. Our technicians will give you professional drilling machine related answers.

2020

04-16

Safe Operation Tutorial of Drilling Machine_Puyang Wanglian Company

At present, drilling rigs are widely used in geothermal, groundwater and other aspects. It uses mechanical equipment or manpower to drill holes in the ground from the ground.

2020

04-13

Thread Types and Classification of Drilling Rig Pipe

According to the different thread, the drill pipe of oil drilling rig can be divided into ordinary drill pipe, square tooth drill pipe and weighted drill pipe. The common drill pipe is the main component of the drill string. The top is connected with the square drill pipe and the bottom is connected with the drill collar. Its function is to transmit torque, make the drill bit drill down and deepen the borehole.

2020

04-13

Causes of drill bit slippage in engineering drilling rigs

The slippage of the drill bit can be overcome by first combining the single bucket footage depth on the display. Although the mud layer drilling resistance is small, as the slag inside the drilling bucket increases, resistance will be generated to the slag inlet, so the drilling resistance is increased, and the sound of the planetary reducer on the power head changes with the resistance, so listening to the sound of the power head can judge the footage. When the drilling resistance increases, the rotation speed of the power head also decreases, so the footage can also be judged by the rotation speed of the drill pipe.