Accessories for water well drilling rigs that require regular maintenance
Release time:
2020-05-11
Full hydraulic water well drilling rigs require regular maintenance todayWanglian MachineryTo learn about the maintenance of accessories.
If any part of the full hydraulic water well drilling rig is found to be abnormal, should it be diagnosed immediately and remedial measures should be taken? Today we meet to see the need for regular maintenance.
Maintenance of the filter element: The filter element is used as a filter to filter out impurities in the oil circuit or gas circuit to prevent entry into the system and cause failure. Operation and maintenance manuals. If metal particles are found to adhere to the old filter element, please diagnose immediately, take corrective measures, and use a pure filter element that meets the machine specifications.
It is certain that the theoretical analysis results are in good agreement with the actual drilling results.
Secondly, azimuth and small formation slope, formation position force, front angle, formation pressure, formation dip, normal cutting anisotropy index of full hydraulic water well drilling rig, formation anisotropy index, borehole direction and formation change direction, or possible direction decrease. Under normal conditions, when the well is formed, the drill bit of the full hydraulic water well drilling rig is close to the normal direction of the formation, and the azimuth angle of the formation changes the direction of the well to the formation. The formation deformation force is zero if the full hydraulic water well rig well direction matches the azimuthal direction of the formation.
Third, based on the proposed new concept, a key formation slope equation is found, which provides a preliminary quantitative explanation for determining the formation of the drill bit.
Fourth, the drilling force is proportional to the drilling pressure, and increasing the drilling pressure will increase the contact force significantly. Safety precautions of full hydraulic water well drilling rig during transportation and maintenance
A drilling equipment manufacturer said that fully hydraulic water well drilling rigs need to maintain gravity balance according to road conditions. Construction sites shall not be excavated at will and backfill pits shall be clearly marked. Tilt the landing angle of the gantry to the left and right, and then turn the car to adjust the drill bit.
If there is water on the road or construction site, use a drill to guide the machine. When disassembling the main winding brake system of the drill bit, it is strictly forbidden to maintain the main roller, which must be cooled to prevent it from getting hot. Be careful with the machine when disassembling the correct non-rotating wire rope and puller. Rotation damage: If the wire rope is rotating during operation, and the wire rope is twisted due to the flexibility of the lifting device of the full hydraulic water well drilling rig, it is necessary to avoid injury.
This is the understanding of full hydraulic water well drilling rigs about maintenance accessories and safety precautions. I hope it will help you.
Previous :
Related News
Trailer Hanging Daily How to Maintain
2023-12-09
Characteristics of drilling rig
2022-08-25
Contact Us
E-mail:admin@wanglianjt.cn
North 200 Meters West of the Intersection of Xindong Road and Gaoyang Avenue, Hualong District, Puyang City, Henan Province
SAF Coolest v1.3.1.2 设置面板 NQISD-ZDTD-JAAEE-ZQS
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page